CPDC Add/Show Routes

The ELAN Default Gateway, set in baseparamsconfig, may need a route (tied to eth0) to work off-net.

• Add a static route to a Signaling Server from the CLI with routeconfig (admin2).

Where:

-net <target_ip>	the target_ip is a network
-host <target_ip>	the target_ip is a host
-gw <gateway_ip>	Route packets via gateway (must be reachable)
-netmask <mask>	Netmask must be used only when adding a network entry
-dev eth0/eth1	CPDC network port, where: eth0 = ELAN; eth1 = TLAN
-tag <tag_name>	Add route with tag_name (optional)

Help:

$ routeconfig -h displays extensive help:

• show Show only user configured routes
• show -all Show all system and user configured routes
• add Add a new route, see example below
• del Delete a route, by -net ip, -gw ip, -tag name, etc.

Example:

ss0.pbxbook.com login: admin2
Password:
Last login: Fri Aug 19 09:09:51 on ttyS0
[admin2@ss0 ~]$ routeconfig add -net 13.224.0.0 -gw 13.11.200.254 -netmask 255.255.255.0 -dev eth0
Route succesfully added
[admin2@ss0 ~]$ routeconfig show

Kernel IP routing table (user configured routes)

ROUTE#  Destination      Gateway          Netmask          Iface  Tag
1       13.224.1.0      13.11.200.254  255.255.255.0    eth0   manual
2       13.224.0.0      13.11.200.254  255.255.255.0    eth0   manual
[admin2@ss0 ~]$

---