Info Block Parameters
Note: Applies to: 2001, 2002, 2004, 2007, 1110, 1120E, 1140E, 1150E, 1165E, 1210, 1220, and 1230 IP phones
All the parameters that can be provisioned via the Info-Block are provided in the table below. Note that not all parameters need to be specified in the Info-Block. If an option is included, the parameter will be set with the value specified. If an option is not included, the phone will retain its default value, or the value previously set if 'stickiness' (st) is set (default=enabled).
Info Block Parameters are provisioned primarily by the system.prv file, although, the 'file' parameter indicates which other files (if any) are also to be loaded. For example, 'type' provisioning may use a 1140e.prv file to enable Bluetooth on 1140E sets only.
Info Block Parameters can also be passed via DHCP Site Specific Option (128), eg: Nortel-i2004-B,param=value;param=value;
| Parameter | Value | Description |
|---|---|---|
| a1 | Value from 0 to 255 | Primary server action code |
| a2 | Value from 0 to 255 | Secondary server action code |
| ar | 'y' yes 'n' no | Enable Auto-recovery |
| arl | 'cr' critical 'ma' major 'mi' minor | Auto-recovery level |
| blt | '0' 5 seconds '1' 1 minute '2' 5 minutes '3' 10 minutes '4' 15 minutes '5' 30 minutes '6' 1 hour '7' 2 hours '8' always on | Backlight timer |
| bold | 'y' yes 'n' no | Enable bold on font display |
| br | Value from 0 to 15 | Brightness value |
| bt | 'y' yes 'n' no | Enable Bluetooth (1140E IP Deskphone and 1150E only) |
| ca | String up to 80 Characters | Certificate Authority (CA) server |
| cachedip | 'y' yes 'n' no | Enable cached IP |
| cadomain | String up to 32 Characters | Certificate Authority (CA) domain name |
| cahost | String up to 32 Characters | Certificate Authority (CA) host name |
| cdiff | Value from 0 to 255 | Diffserv code points for control messages |
| ct | Value from 0 to 15 for 1100 Series IP Deskphones Value from 7 to 39 for 2007 IP Deskphone | Contrast value |
| dcpactive1 | 'n' Inactive 'y' Active | Profile is active or not |
| dcpattrcn1 | String up to 128 Characters | If 'Auto CN' is disabled, this value is used instead of combining cadomain and cahost |
| dcpattrextkeyusage1 | 'a' anyExtendedKeyUsage 'c' clientAuth 'i' ipsecIKE (RFC 4945) 'm' iKEIntermediate ' ' no Extended Key Usage | Define the Extended Key Usage attributes to be requested for the device certificate. The default is clientAuth. |
| dcpcaname1 | String up to 128 Characters | CA name included in the SCEP request to identify requested CA (note that not all CA require the CA name) |
| dcphostnameoverride1 | String up to 128 Characters | Override hostname (cahost) for this DCP only |
| dcpsource1 | 'scep', 'pkcs12' | Method used to install device certificates |
| dhcp | 'y' yes 'n' no | Enable DHCP |
| dim | 'y' yes 'n' no | As of UNIStim software release 3.4, the previously supported 'dim' parameter is no longer supported since its functionality is superseded by the dimt parameter. The phone will still accept the dim parameter to prevent errors when reading existing provisioning files but the parameter will be ignored in favor of the new dimt parameter. |
| dimt | '0' Off '1' 5 seconds '2' 1 minute '3' 5 minutes '4' 10 minutes '5' 15 minutes '6' 30 minutes '7' 1 hour '8' 2 hours | Phone inactivity timer to dim the screen (2007 IP Deskphone only) |
| dns | String up to 32 Characters | Primary DNS server URL |
| dns2 | String up to 32 Characters | Secondary DNS server URL |
| dp | Value from 0 to 8 | 802.1Q p bit for data stream. Provisioning this value to 8 tells the phone to use the value it receives from the LLDP Network Policy TLV or from the call server |
| dq | 'y' yes 'n' no | Enable 802.1Q for PC port |
| dscpovr | 'y' yes 'n' no | DSCP Precedence Override |
| dv | 'y' yes 'n' no | Enable VLAN for data |
| dvid | Value from 1 to 4094 | VLAN ID for data VLAN |
| eap | 'dis' disable 'md5' EAP-MD5 'peap' PEAP/MD5 'tls' EAP-TLS | Disable or choose an EAP authentication method [1] [2] |
| eapid1 | String up to 32 Characters | 802.1x (EAP) device ID1 [1] [2] |
| eapid2 | String up to 32 Characters | 802.1x (EAP) device ID2 [1] [2] |
| eappwd | String up to 32 Characters | 802.1x (EAP) password [1] [2] |
| file | 'z' read zone file 't' read type file 'd' read device file | For system specific provisioning file specifies what other provisioning files to read (can include more than one file option) |
| fs | 'y' enabled 'n' disabled | Font smoothing enabled [3] |
| hd | 'w' wired 'b' Bluetooth 'n' none | Headset type |
| igarp | 'y' yes 'n' no | Ignore GARP |
| ll | 'cr' critical 'ma' major 'mi' minor | Log level |
| lldp | 'y' yes 'n' no | Enable 802.1ab LLDP [1] |
| mdiff | Value from 0 to 255 | Diffserv code points for media messages |
| menulock | 'f' full lock 'p' partial lock 'u' unlock | Menu lock mode |
| menupwd | Up to 21 characters containing only numeric digits, asterisk (*) and hash (#) - i.e. only the dialpad symbols | Administrator password [2] |
| nid | 'a' auto negotiation 'f' full duplex 'h' half duplex | Network port duplex [1] |
| nis | 'a' auto negotiation '10' 10 Mbps '100' 100 Mbps | Network port speed [1] |
| ntqos | 'y' yes 'n' no | Enable Avaya Automatic QoS |
| of | 'y' enabled 'n' disabled | Outlined font enabled [3] |
| p1 | Value from 1 to 65535 | Primary server port number |
| p2 | Value from 1 to 65535 | Secondary server port number |
| pc | 'y' yes 'n' no | Enable PC port |
| pcd | 'a' auto negotiation 'f' full duplex 'h' half duplex | PC port duplex |
| pcs | 'a' auto negotiation '10' 10 Mbps '100' 100 Mbps | PC port speed |
| pcuntag | 'y' yes, 'n' no | Enable stripping of tags on packets forwarded to PC port |
| pk1 | String representing 16 hexadecimal digits | S1 PK [2] |
| pk2 | String representing 16 hexadecimal digits | S2 PK [2] |
| prov | String up to 32 Characters | Provisioning server address or URL (if string prefixed with "http://" the phone will connect to a HTTP server, otherwise the phone will connect to a TFTP server) |
| r1 | Value from 0 to 255 | Primary server retry count |
| r2 | Value from 0 to 255 | Secondary server retry count |
| s1ip | Value from 0.0.0.0 to 255.255.255.255 | Primary server IP address |
| s2ip | Value from 0.0.0.0 to 255.255.255.255 | Secondary server IP address |
| si | 'y' enabled 'n' disabled | Simple icons enabled [3] |
| srtp | 'y' yes 'n' no | Enable SRTP-PSK |
| srtpid | 96 115 120 | Payload type ID |
| ssh | 'y' yes 'n' no | Enable SSH |
| sshid | String between 4 and 12 characters | SSH user ID [2] |
| sshpwd | String between 4 and 12 characters | SSH password [2] |
| sst | '0' Off '1' 1 minute '2' 5 minutes '3' 10 minutes '4' 15 minutes '5' 30 minutes '6' 1 hour '7' 2 hours | Phone inactivity timer to initiate the slide show (2007 IP Deskphone only) |
| st | 'y' yes 'n' no | Enable stickiness (provisioning is persistent in the event a new info block is not received) |
| th | '0' black theme '1' metallic blue theme '2' blue theme '3' orange theme '4' green theme '5' red theme '6' purple theme | Theme [3] |
| unid | String up to 32 Characters | Unique network identification |
| usb | 'y' enabled 'n' disabled | UBS port enabled [3] |
| usbh | 'y' enabled 'n' disabled | UBS headset device enabled [3] |
| usbk | 'y' enabled 'n' disabled | UBS keyboard device enabled [3] |
| usbm | 'y' enabled 'n' disabled | UBS mouse device enabled [3] |
| usbms | 'y' enabled 'n' disabled | UBS memory stick (flash drive) device enabled [3] |
| utb | 'y' use the selected theme background 'n' use the user selected image - if present | Use a user selected background picture [3] |
| vcp | Value from 0 to 8 | 802.1Q control p bit for voice stream. Provisioning this value to 8 tells the phone to use the value it receives from the LLDP Network Policy TLV or from the call server |
| vlanf | 'y' yes 'n' no | Enable VLAN filter on voice stream |
| vmp | Value from 0 to 8 | 802.1Q media p bit for voice stream. Provisioning this value to 8 tells the phone to use the value it receives from the LLDP Network Policy TLV or from the call server |
| vpn | 'y' enable 'n' disable | Enable the UNIStim VPN Client (UVC) within the phone |
| vpnauth | 'psk' preshared key 'certificate' X.509 certificate | Authentication credential2 |
| vpndiff | 0-255 | If vpndiffcpy=n, then this value is used for the DSCP value for the tunnel traffic |
| vpndiffcpy | 'y' copy DSCP from inner packet, 'n' use vpndiff value | Source of DSCP value for the tunnel traffic. Determines if DSCP value is copied from inner packet to outer packet or if vpndiff is used. |
| vpnmode | 'aggressive' 'main' | Authentication mode |
| vpnmotd | 0-999 | Message of the Day (MOTD) timer |
| vpnpskpwd | String up to 64 characters | PreShared Key (PSK) password |
| vpnpskuser | String up to 64 characters | PreShared Key (PSK) User ID |
| vpns1 | String up to 64 characters | IP address or FQDN3 of the primary VPN server |
| vpns2 | String up to 64 characters | IP address or FQDN of the secondary VPN server |
| vpntype | '1' Avaya VPN | Only Avaya (heritage Nortel) VPN devices are supported at this time |
| vpnxauth | '0' none '1' password | X Authentication type |
| vpnxauthpwd | String up to 64 characters | X Authentication password |
| vpnxauthuser | String up to 64 characters | X Authentication User ID |
| vq | 'y' yes 'n' no | Enable 802.1Q for voice [1] |
| vvsource | 'n' no VLAN 'a' auto VLAN via DHCP 'lv' auto VLAN via VLAN Name TLV 'lm' auto VLAN via Network Policy TLV | Source of VLAN information |
Notes:
[1]: Warning - changing this parameter could impact the network connectivity and may require manual correction
[2]: Warning - provisioning this parameter via TFTP, HTTP, or DHCP means that secure information is sent in clear text
[3]: Applies to the 1165E IP Deskphone only