Programming Music On Hold

Note: A Music source must be connected for this to work!

To enter a programming session, follow the next few simple steps:

1. Press Feature**CONFIG (* * 2 6 6 3 4 4)
2. Enter Password: CONFIG (2 6 6 3 4 4)

   Display will read: Terminals & Sets

Using the navigation keys, as displayed below, follow the next simple steps:

3. Press: Next

   Display will read: Lines

4. Press: Next

   Display will read: Services

5. Press: Next

   Display will read: System Speed Dial

6. Press: Next

   Display will read: Passwords

7. Press: Next

   Display will read: Time and Date

8. Press: Next

   Display will read: System Programming

9. Press: Show

   Display will read: Change DN's

10. Press: Next

    Display will read: Feature Settings

11. Press: Show

    Display will read: Background Music
    Press Change "softkey" to Y

12. Press: Next

    Display will read: On hold
    Press  change "softkey" until you see Music

13. Press: Next

Congratulations! You have just enabled Music On Hold.

---