SCH6600 - 6699

SCH6600	Default ESCALATE has to be smaller than current SUPPRESSION.
SCH6601	The ALRM_FILTER package is restricted. Action: The requested action is denied.
SCH6602	System Event List is empty. Action: None. Events cannot be printed.
SCH6605	Duplicate event.
SCH6606	Escalate must be less than suppress.
SCH6607	Event not in Event Preference Table.
SCH6608	Invalid escalate.
SCH6609	Invalid event id.
SCH6610	Invalid new size; out of valid range.
SCH6611	Invalid severity.
SCH6612	Log resize aborted.
SCH6613	Log resize failed.
SCH6614	Missing event id.
SCH6615	New suppress threshold is out of valid range.
SCH6616	Suppress must be greater than the maximum escalate value in the event preference table (EPT).
SCH6617	Timer value is out of valid range.
SCH6618	Event Preference Table (EPT) is full.
SCH6619	Call Park data block number out of range. The valid range is 1-5. Action: Enter valid input.
SCH6621	Trying to change/out/print a data block that does not exist. Action: Enter a Call Park Block that is defined in the customer database.
SCH6622	Mutually exclusive supervision types entered.
SCH6623	Must create data block 0 before creating other data blocks.
SCH6624	Must delete/out other data blocks before deleting/out data block 0. Action: Remove all the Secondary Call Park Blocks first.
SCH6625	Invalid input. For card 0, units 0-7 must all be of the same type and units 8-15 must all be of the same type.
SCH6626	Invalid input. For card 0, the valid unit range for MFC/MFE/MFK5/MFK6/MFR units is 8-11.
SCH6627	ARDL package is not equipped (Overlay 11, 16, 81).
SCH6628	ARDL feature is not allowed for SL-1 and ARIES sets only (Overlay 11).
SCH6634	This DN cannot be used as it would create an illegal multiple appearance of the data DN of a dynamic voice/data TN.
SCH6635	DTM key could not assigned with current set configuration. The DTM key has been removed.
SCH6636	Only one DTM key is allowed per TN.
SCH6638	PGND/PGNA is not a valid input. The PAGENET package is not equipped. Action: Contact your technical support group for correct package configuration.
SCH6639	PTU Package not equipped. Action: Equip PTU package and reload if PTU package is required.
SCH6640	Cannot change agent ID mode (AID) to "no" if MQA option is enabled. MQA option must be disabled first.
SCH6641	Cannot remove an ADS block if the MQA option is enabled first, which requires the MAX HSL to be disabled.
SCH6642	The MQA option cannot be changed ("yes" to "no" or "no" to "yes") if the High Speed is up.
SCH6643	The Report Control Option cannot be disabled if MQA agents belong to the queue.
SCH6644	An MQA agent has logged into this queue since the Report Control option (RPRT) was changed. Since this option cannot be disabled when MQA agents are serving the queue, the option is reset to its original value ("yes").
SCH6645	Only one ADS block per system can have MQA enabled.
SCH6646	A pilot DN of USE=SLCU (Speed Call List User) cannot be a member of the Speed Call list it accesses.
SCH6647	The ACD DN specified is not compatible with MQA. Specifically, one of the following is true for the ACD DN specified: IVMS, IMS, IVR, or DAL is enabled, or RPRT is disabled. This message is just a warning. The ACD DN specified will be assigned to the agent, but the agent set can no longer be an MQA ACD agent.
SCH6649	Cause: VNS DN ALREADY DEFINED the response cannot be accepted because at least one VDN is already defined in another VDN block, Impact: the response is not accepted and VNDN is prompted again. Output data: no output data. Action: Check which VDNs are already defined and configure blocks of DNs without them.
SCH6650	Missing FNET L/W/ from disk.
SCH6651	Missing FPEC L/W from disk.
SCH6652	The superloop specified is not configured as a Fiber Remote superloop.
SCH6653	TN on Phantom DTI2 loop must be TIE or DID. Action: Restart LD 14 and answer TIE to the prompt TYPE, or answer the prompt TN by choosing a loop which is not defined as a Phantom DTI2 loop.
SCH6654	Cannot move a TN located on a Phantom DTI2 loop. Action: Restart the LD14 and answer NEW to the prompt REQ, or answer the prompt TN by choosing a loop which is not defined as a Phantom DTI2 loop.
SCH6655	n Error during the ISPC trunk configuration. Where n = the error cause: 1. ISPC Reference number already exists. In Overlay 14, in answer to the prompt SREF, an ISPC reference number which is already configured for the system, is not allowed. 2. The trunk must be a TIE trunk. 3. The trunk must be configured with the DTN class of service. 4. Data corruption with the route pointer. 5. The route is not an ISL route. 6. The trunk is not a DID trunk. 7. The route is not configured with DSEL=DTA. 8. The route must not be an ISL route. 9. The route is not configured with DLTN=YES 10. The route is not configured as incoming. 11. The route is not configured with PRDL=BSY 12. The route is not configured with DTD=YES 13. The route is not configured as outgoing. 14. The route is not configured with NEDC+ETH 15. The route is not configured with FEDC=ETH 16. The route is not configured with CPDC=NO 17. DDD_PACKAGE is restricted. Action: Check the validity of the SPC reference number provided by the telecommunication administration.
SCH6656	The ISPC package 313 is mandatory to configure a Phantom DTI2 loop. Action: Enable the ISPC Package 313 and reload the PBX if Phantom DTI2 loop is required.
SCH6657	You are not allowed to create more than one TN at the time on a Phantom DTI2 loop. Action: To configure more than one TN on a Phantom DT12 loop, complete the command sequence in LD 14 for each additional TN.
SCH6658	Service change is not allowed on unit currently involved in a Broadcast call.
SCH6659	CLID entry no defined for the customer.
SCH6660	Service change is not allowed on this TN since it is currently pending for this application Login or logout event.
SCH6661	Request to create a DISA block for the customer is not allowed. The customer already has 240 DISA Blocks defined.
SCH6662	This set type cannot have the FLXA class of service.
SCH6663	A DTM key cannot be on key 00.
SCH6664	The FLXA class of service is required for a voice TN on a high unit or a data TN on a low unit.
SCH6665	The VDN block does not exist. In overlay 79, the VDN entered at the prompt VNDN is not accepted when the request is OUT, DIS, or ENL. Action: Enter a correct value, which must be the first VDN of an existing VDN block.
SCH6666	The maximum number of VDN’s for a customer has been exceeded. The FLXA class of service is required for a voice TN on a high unit or a data TN on a low unit. Action: Re-enter a number for your VDN block which does not exceed your customer limit.
SCH6667	The change is not accepted because VNS calls are still using this D-channel. Action: All calls using this D-channel must be cleared before VNS parameters of the D-channel can be modified.
SCH6668	Card 0 not supported in this overlay.
SCH6669	WARNING: New MFC/MFE/MFK5/MFK6 units on Card 0 can only be enabled by ENLX in LD 34. Action: After configuration of these units, go into LD 34 and perform ENLX 0.
SCH6670	QSIGGF package is restricted.
SCH6672	Master Mode package is restricted.
SCH6678	Supervised DIDs: JDID requires Japan Trunk Package (97), loop start signalling and XUTJ pack.
SCH6679	Warning: The prime key does not have any of the following functions: SCR, MCR, SCN, MCN, ACD. The model is invalid for Automatic Set installation.
SCH6680	Only JDID and BTS CLS are allowed for Loopstart DID trunks.
SCH6681	CPK is not a legal response because the release ID at the far end is below rls22 or the interface type of the D-channnel is not SL1. Action: Change the release ID or change the interface type.
SCH6682	CPK is not a legal response because the package, CPRKNET, is not equipped. Action: CHNge the package restriction.
SCH6683	The position ID cannot be changed while this agent is acquired.
SCH6684	This DN cannot be used with a DTM key as it is already in use.
SCH6685	NAC is not a valid RCAP; BRI route IFC configuration is not SL1.
SCH6686	RCAP is changed to XNAC due to incompatible IFC configuration.
SCH6687	NAC is not a valid RCAP. The D-channel IFC configuration is not SL1; or RLS configuration is less than 22.
SCH6688	RCAP is changed to XNAC due to incompatible RLS configuration.
SCH6689	Customer option is changed to CPD due to Call Park database memory allocation problem.
SCH6690	FLXA class of service is allowed only on Aries sets connected to XDLC cards.
SCH6691	The associated DSLs must be removed before changing the BRIT route interface type to ISGF or ESGF.
SCH6692	x1 x1 = % Invalid input when the MMCS package is not equipped.
SCH6693	x2 x2 = % DTIM should be defined to have PRDL=DNIS
SCH6694	x3 x3 = % The route is not DNIS.
SCH6695	x4 x4 = % Invalid entry for FDG, FEX and WATS routes.
SCH6696	x5 (x5 = % INDI + NDGT) greater than or equal to 31 is not acceptable for autoterminate routes.
SCH6697	x6 x6 = % DTIM only supported for DID, TIE or IDA trunks.
SCH6698	There is a conflict in the configuration of RCAP and NASA, i.e. if RCAP’s CPK is set, then NASA is not allowed to be defined as "NO". Action: Change either configuration as needed.
SCH6699	CAB number out of range.

---