ERR5200 - 5299

ERR5231	No outgoing ESDI packet allowed when the ESDI card is disabled. Output: {aml number in decimal}.
ERR5232	No incoming ESDI packet allowed when the ESDI card is disabled. Output: AML: {aml number in decimal}.
ERR5233	The MSDL AML port is disabled. Therefore the incoming AML message is disregarded. Output: AML: {aml number in decimal}.
ERR5234	The given AML (i.e., CLS) priority is disregarded. Output: AML: {aml number in decimal} PRIO: {msg_priority in decimal}
ERR5235	The MSDLMISP_HDLR handler failed the outgoing XDU MSDL AML request. Output: AML: {aml number in decimal} CODE: {msdlmisp_hdlr failure code in decimal}
ERR5236	The MSDLMISP_HDLR handler failed the outgoing DU MSDL AML request. Output: AML: {aml number in decimal} CODE: {msdlmisp_hdlr failure code in decimal}
ERR5237	The GET_O_BUF procedure failed to find a free outgoing buffer to send an outgoing AML MSDL packet. Output: AML: {aml number in decimal}.
ERR5241	NIL pointer passed in as a parameter. Unable to update the TN block with the wake up information. Cannot proceed. Procedure WRT_AWU_TN.
ERR5242	NIL pointer to the HM_STRUCT which contains the wake up information. Cannot update and cannot proceed. Procedure WRT_AWU_TN.
ERR5243	tn Digit collect message received from RAN trunk unit.
ERR5244	type tn An invalid problem type has been received in a problem report message.
ERR5245	type tn An invalid message type has been received from a card or unit.
ERR5252	The SDI I/F Handler could not retrieve a free buffer to send an outgoing message.
ERR5254	The SDI I/F Handler encountered a problem transmitting an expedited message
ERR5255	The SDI I/F Handler encountered a problem transmitting a standard ring message.
ERR5256	The SDI I/F Handler received a data.indication primitive with a length of zero.
ERR5257	The SDI I/F Handler received a data.indication primitive but could not store incoming characters because the TTY input buffer is full. Incoming characters were discarded.
ERR5258	The SDI I/F Handler received a data.indication primitive but could not store all incoming characters because the TTY input buffer became full. Some incoming characters were discarded.
ERR5259	The SDI I/F Handler received an incoming message that had an unsupported primitive ID.
ERR5260	The SDI I/F Handler received an incoming message that was not in the correct MSDL ring or expedited buffer.
ERR5261	The SDI Port was disabled because the number of response timeouts on a output primitive has been exceeded.
ERR5262	The SDI I/F Handler received a message from a port that is not enabled.
ERR5263	The SDI I/F Handler received an incoming message that could not be processed in the current SDI state.
ERR5264	The SDI I/F Handler received a data.indication message that had more characters than the maximum size of the TTY input buffer. The message is discarded.
ERR5266	The SDI I/F Handler received a maintenance primitive message with an invalid data length. The primitive message is discarded.
ERR5267	The SDI I/F Handler encountered a problem when trying to resynchronize flowcontrol variables with the MSDL I/F Handler.
ERR5272	tn An invalid maintenance message has been received from a card.
ERR5275	The DCH timed out while waiting for a test mode state change.
ERR5276	DCH: {DCH NUMBER} {DCH LINK STATE} An SSD message to process the MSDL DCH output request queue is found to be lost. No action is required by the craftsperson.
ERR5277	An invalid DCH link state was found and corrected.
ERR5278	The DCH state was found to be disabled, while the DCH port was disabled.
ERR5279	Application state was disabled, while the port on the MSDL card was enabled.
ERR5280	Wrong Optional Information Element Length.
ERR5281	Pointer BG_TFC_TODAY_PTR or BG_TFC_YESDY_PTR is NIL because of the low memory problem or the memory corruption. Action: Manually INIT the system to rebuild memory blocks. If manual INIT still does not work, you should add more memory cards or remove data from the system.
ERR5282	c dn r Warning: Undefined RAN route for night RAN. Where: c = customer number, dn = ACD DN, r = route number. Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt NRRT in LD 23 for the ACD DN.
ERR5283	No message sent to the ICP computer. Action: Update the computer database manually.
ERR5284	The DCH port on the MSDL card was found to be enabled, while the MSDL card was not operational.
ERR5285	c dn r Warning: Undefined RAN route for first RAN. Where: c = customer number, dn = ACD DN, r = route number. Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt FRRT and connection timer at prompt FRT in LD 23 for the ACD DN.
ERR5286	c dn r Warning: Undefined RAN route for second RAN. Where: c = customer number, dn = ACD DN, r = route number. Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt SRRT and connection timer at prompt SRT in LD 23 for the ACD DN.
ERR5287	Invalid routing data encountered for Network Call Pickup/TAFAS. Digits do not indicate a valid DSC/TSC/AC1/AC2 route access code to route the Call Pickup request.

---